Frommelt fabrics are time-tested and proven on the job.
|
For nearly half a century, Frommelt has been manufacturing products for safety; and we pride ourselves on our extensive experience in creating solutions for industry from the finest quality fabrics. All fabrics shown below are used in our standard line of curtains, screens and blankets and can also be ordered as roll goods for custom applications.
For additional information, or to order from an inside sales representative:
866-852-1500
or 563-587-4401
|
Premium Grade Roll Goods
|
Duck: 16 oz. fabric. This material resists fire, water, and mildew and has earned CFM approval.
|  | Weld-Tex™: 16 oz., vinyl-coated, resists oils, alkalis and most acids along with fire, water and mildew. CFM approved. |
| Zebra: Same fabric specifications as Weld-Tex with distinctive yellow and black stripes on the face and solid black on the reverse. | | Armor-Pleat™: Heavy-duty 50 oz. black vinyl abrasion resistant material. Ideal for grinding applications and equipment protection, especially where welding sparks may come in contact with the material.
|
| Mesh-Netting: 3 oz. nylon with 1/2" hexagonal mesh with white vinyl edge binding, treated with flame retardant chemicals for CFM approval. General purpose use. Not to be used as a personal restraint. | | Fro-Sil™: 18 oz. fiberglass impregnated with a flame retardant rubber, 25% by total weight. Treatment provides a greater life and improved resistance to abrasion, flexing, tearing and puncture. Water and oil resistant. Meets the requirement of NRC Guide 1.36.
|
| Heat Reflective ThemoShield: 28 oz. fiberglass fabric. Features one surface faced with a highly reflective aluminized mylar for reflection of radiant heat. The other side is treated with a flame retardant coating providing moisture resistance. | | Fro-Guard™: 28 oz. fiberglass coated with a rubberized (neoprene) coating on one side and an acrylic finish on the other side. Offers excellent resistance to abrasion. Intended use is for medium to heavier duty welding, heat source isolation and general protection against grinding, cutting, and spraying.
|
Fro-Tex™: 26 oz. fiberglass, textured finish on one side. Offers better abrasion resistance and tensile strength when compared to untreated fiberglass. For light and medium-duty welding and can be used for heat source isolation. Can also be used for general purpose grinding, cutting and spraying.
| | |
Commercial Grade Roll Goods
|
Silica: Available in 18 oz. and 34 oz. weight. Use for heat relieving, high temperature and molten metal protection. Can also be used for pads and welding covers.
| | Neoshield: - 24 oz. neoprene treated fiberglass fabric coating on one side, intended for light to medium duty welding and protection |
Weldflex 1: 21 oz. with neoprene and vermiculite coating on both sides to shed spark and light spatter. Offers better resistance to abrasion and tensile strength when compared to untreated fiberglass. Intended for light to medium duty welding, heat source isolation, grinding, cutting and spraying.
| | Fiberglass - No Coating: 18 0z. untreated fiberglass cloth. Our best value for light duty welding protection from spark and spatter. Has limited abrasion and tensile strength characteristics, intended uses are limited to welding covers. |
Premium Transparent Grade Roll Goods
|
Saf-T-Vu™*: Transparent .012" to .014" vinyl film is CFM approved. Ideal for curtains and screens where visibility is required and protection is provided against UV light and light forms of flying debris.
| | Saf-T-Vu2™*: Extra heavy duty PVC material helps control noise level. Use for machinery area partitions where visibility with optical protection is required, and vertical curtains. |
Anti-Static Saf-T-Vu™*: Clear .012" to .014" vinyl with a conductive scrim that grounds static charges. For isolating areas that must be kept clean and free of static charges. Meets military specifications B-81705B for surface resistivity.
| | |
| *NOTE: Saf-T-Vu and Saf-T-Vu2 are not intended for use in lieu of visors, goggles or view port windows for welding operations; clear material has no ultraviolet filtering capabilities and is recommended for physical protection only. |